Saturday, March 20, 2010

Scripting

The long gaps in between progress updates is due in part to totally focusing on the story and script. I am putting/going to continue to put so much time and effort into the production of the artwork... I really want the story to be as good as possible. I am re/writing the script over and over these days, trying to get it perfect... the process takes me forever.

I don't know quite why, but making a GN takes me literally months and months which end up compounding into years; to move from idea to script takes me an extremely long time, and then from there to art takes even longer. The same thing happened on my last GN as well (which was far inferior to what I intend FUMES to be). Hopefully, the end product will be worth the time invested. The process might be faster if I was working on a regular, linear schedule, but my writing technique is to go in small, inspired bursts, and then leave it for a time so I can come back after a week or so with fresh eyes and edit what I've written. This is probably an unorthodox/inefficient way to work, but again, I want the best possible end result I can make... so its the best way I know to do it.

In any event, the primary script is nearing completion. There will be a second narrative that will be interweaved into the primary story, which I will be approaching as a completely separate script and then integrating structurally afterwards. Once the primary script is done, I intend to begin thumbnails/storyboards, and start moving more into the art phase.

Tuesday, October 13, 2009

Tinytown

A good chunk of the story takes place in a massive desert shantytown (of sorts) so I have been building a miniature for that. I've nicknamed the prop Tinytown. The idea is to have about 150-200 small shacks which I will use multiple photos of to create the illusion of a giant slum of thousands of shacks.

The actual props are made from paint swatches which I grabbed from Home Depot, cut up, and origami'd into small cubes.


It took forever, but I had to just keep making them until I could fill up the board...



I also had to make roofs for the shacks to give them a less geometric, less cookie-cutter, more realistic appearance. The roofs were also made from paint swatches, only for the roofs I weathered them by crumpling them, and then adding black and white ink washes and splatter.


Still going...
Finally done. I estimate that I made around 200 of these little shacks , maybe more. When I finally get around to using them for the art, I will arrange them to look more like an actual slum, with some 2-story shacks, some shack-blocks, etc.

Monday, October 20, 2008

Costume time, part 1

I decided to move ahead with building the costume based on the very basic template idea I had. At Goodwill, I somehow lucked into finding a pair of football shoulder pads that were the exact right size for me. Since the main character in the book, Blac, only has pads/gear on one shoulder, I cut the football pads in half, and then deconstructed one side into the bare pad pieces. I took these pieces and bolted them to the other, still-intact side in order to disguise the fact that they were indeed just football shoulder pads. I also found some PVC couplings at Home Depot that I thought would serve well to give the shoulder piece some interesting contour (and hide the bolts holding everything together). Using some plastic epoxy, I glued them onto the pads and allowed them to dry.

I also constructed a basic mannequin that matched my physical dimensions out of PVC. It has been great to use while working on the costume...



While that was drying, I went to JoAnn Fabrics and bought some black fake fur material... kind of expensive actually, something like $15 a yard. The costume I had in mind called for a half-cape made from the hides of a specific type of animal in the story, a black buffalo/desert cow. I took the material and cut it into rough shapes that would approximate animal hides, which I later planned to connect using metal rings.


Once I cut the shapes, it was apparent that the fur was too clean and new looking to have come from animals wandering a desert... also, it doesn't make sense that a desert animal would have evolved to have a black hide, but we'll overlook this little plot hole and chalk it up to, oh, intelligent design (or unintelligent design, as it were).

In any event, I needed to make the fur look more weathered, so I grabbed my trusty can of Hot Rod Yellow spray paint and dusted the fur with paint. While the paint dried on the fur, I was able to mess up the hair and allow it to dry that way- very much like yellow hairspray.

Thursday, October 16, 2008

Meanwhile...

Throughout the building of the model, I had been trying to come up with a look for the main character in the book, Blac. I was doing a lot of writing for the character (backstory, personality, characterization & his actual deep character, etc ), but I kept hitting a mental wall when it came to his appearance. The one thing I was sure of was that he had to bury himself in "stuff" - clothing, padding, cape/shawl, mask, hood, skirt, wrappings- in order to hide, while at the same time projecting a fearsome, intimidating appearance. One night while laying in bed, right before falling asleep, a basic template for his look occurred to me and I had to get it on paper... so here is the sketch I did at 4:30 AM in my underwear, without my glasses:

Monday, October 13, 2008

Session 15 - Finished!

Many more applications of black and brown acrylic inks later, and the model is done. All together, it took around 6 months, start to finish. I am very pleased with the results, and early concept illustrations I've done using the model have turned out better than expected...


At the hobby shop, I found a set of Tamiya weathering paints, which are paints that come in a makeup-style compact with three different colors, specifically for adding small weathering detail like rust or sand... I ended up not even using them, though, because I was so pleased with the results from the acrylic ink.







The number from before is completely gone now.

Session 14

More weathering. In addition to using black ink in rubbing alcohol, I also used some yellow and burnt umber, sort of a sandy color, and just went back and forth between applying each color. I built up layers and just pushed and pulled the colors. An added bonus was that, after the sandy color ink/alcohol dried, it left a grainy residue- the black left a somewhat glossy/smooth area of color. The sandy grainy appearance of the tan/brown ink when it dried perfectly simulated sand that had collected in the crevices.





Session 13 - weathering and detail pt. 1

After much hunting around on the internet for tips and techniques on how to weather models, I found a blog which detailed a method of dissolving acrylic ink into rubbing alcohol. When it is applied, the alcohol eventually dries up and evaporates, leaving the ink to bind to the plastic. This method is great because you can build up layers, much like an ink wash drawing. Using black is great, also, because it seeps into all of the crooks and crevices (that would be near-impossible to paint traditionally) and absolutely makes the detail jump out and come alive.


I also added a bumper/grille of sorts. Due to the under-carriage cockpit, I figured it didn't make sense not to have one... if the vehicle is moving at high rates of speed in the story and there's something in its path, the cockpit would be unprotected without one. I tried to originally make one out of pieces of styrene but the results were awful... I ended up making one out of pieces from the roll-cage from a race car kit.



I started making the number disappear with weathering at this stage, too.

Session 12

Took my first steps with weathering. I had problems with using tape to pull the topcoat off, but I found that the super glue I used to put the model together did a nice job of dissolving the topcoat paint... so using qtips and my fingers, I began pulling the paint off in spots with the glue...



...which left some of my skin on the model... (it's okay though, it adds to the effect I think)


I also began the process of hiding/concealing some of the hardware pieces so that they didn't stick out like a sore thumb in the end. I used some black plastic strap to wrap around the front arms, and glued it in place.


I also had the idea that I wanted to have a number on the vehicle. In the story, it is the only one remaining of an original six, so it made sense to me that each one would have been numbered originally. I painstakingly made a mask for a number two that I created in Adobe Illustrator, and sprayed it with a generic spray paint that was lighter than the body color.



I was unhappy with the result... I thought it looked totally out of place, almost like a race car or something... not to mention terribly done since the paint had seeped under the edges of the mask and ruined any sharp edges it was going to have. I figured it wasn't a big deal, since I could add weathering over it fairly easily.


Session 11

I uncovered all of the masked-off parts and put the wheels back on, feeling pretty good about where things were headed. I felt like I still needed to add some more detail so I added some wiring and framework-style pieces (inspired in part by the Star Wars Y-Wing). I also had to weather the tires, since they were too shiny and new-looking. I took the dremel tool to them and just ground the hell out of them, taking out chunks of rubber, adding grooves and scars, etc. At this point, I was ready to start with the weathering process for the rest of the vehicle... which I had no real idea how to do...




Session 10 - first paints

I hit the model with a few coats of Tamiya Color For Plastics "Light Gun Metal", a dull silver-y color. My plan was to steal a technique I learned about in "Sculpting a Galaxy", which is to give a model a sliver undercoat, seal it, hit it with the topcoat color, and then use tape to pull off flakes of the topcoat paint in order to allow the silver undercoat to show through, simulating paint having flaked off of metal. I believe the ILM guys used this technique on Slave I, Boba Fett's ship, to simulate weathering. Tamiya Color paints are great, and they come in small spray cans which is nice, but to be blunt, the paint itself is F-ing nasty, toxic chemical awfulness. If you ever use the stuff, be sure to use a breather or face mask, because the warning label on the can is frightening. Bad, nasty stuff, be careful with it, especially silver, because in addition to the chemicals, silver contains small flakes of metal, which can do a number on your lungs if inhaled.



After the silver dried, I sealed it with Testors Dull Cote flat lacquer overcoat, and then I finished with a few coats of Tamiya Color For Plastics "Dark Yellow". The color ended up being perfect because in the story the vehicle is supposed to blend in with the sand when seen from overhead. This was easily the most exciting part of the build for me, because whenever you paint a model, everything becomes coherent visually and all of the detail pops... everything just comes together, and what was previously 20 different model kits hacked together suddenly becomes one uniform machine.


Thursday, October 9, 2008

Session 9 - More detail, prepping for painting

I continued to add some small details to the model, and I decided that I needed to build a bottom and behind-the-wheel panels, even though they would never be seen in the story. It just looked too odd to me without them when I looked at the model, and I wanted to make the the thing as complete as I could, also. For the bottom, I bought some sheets of Plastruct Styrene, which is a really amazing material- it is as rigid as plastic, yet you can easily cut it (into surprisingly intricate shapes if necessary) with an xacto blade. I was able to make custom pieces which fit perfectly into their places... really, it was much easier to do than I anticipated. It made for some nice cargo compartments.



Next, I decided that I wanted to put a coat of paint on the model, in order to tie everything together and see where more detail was needed. I had to cover up the pieces I had already painted with aluminum foil, which was kind of a pain.